Description

TBL102 series dual-channel shell vibration monitoring protector is a new generation integrated monitoring and protection meter of USA TURBUL System Company. It is applicable to continuously monitoring and measuring absolute vibration of rotary machinery in every vibration field of machinery equipment, e.g. shell vibration, bearing bush vibration and machine frame vibration, etc, convenient for users to analyze and maintain working condition of machine and timely find vibration increase owing to imbalance and misalignment, looseness of components, damage of roller bearing and gear damage, etc. and give out alarm and risk signals, enabling your machine to be protected timely and avoiding unnecessary economic loss. This meter is supplemented with signal isolated gate, greatly improving anti-interference ability, with high accuracy and good stability and applicable to various kinds of rotary machinery equipment such as draught fan, compressor, electric motor, pump and gear box, etc.

Technical Characteristics 

1） Features

· High-accuracy measuring frequency range up to 10~300Hz 

   Intelligent LCD display module

· Independent isolation gate shielding interference

· Original signal isolated output

· Active output, capable of driving load up to 500 Ω 

· MODBUS-RTU data communication   

2）Application

· Draught fan

· Electric motor

· Compressor

· Gear box

3） Technical Parameters

· Note: Unless otherwise specified by the manufacturer, all data are typical values.

· The manufacturer has reserved the right to update and modify the parameters without notice.

· TBL102(vibration velocity): set at will within 0-20.0mm/s (valid value)

· (Amplitude): set at will within 0-200um (peak- peak value);

· Matched with: BE-90G series high-temperature acceleration sensor

· Display mode: LCD intelligent display;

· Linear accuracy ≤1% (full range)；

· Output: Current 4-20mA, corresponding to upper and lower limit measuring ranges;

· (Load ＜500Ω, electric output capacity ≤30mA);

· TDM buffer output (for analysis on vibration signal);

· Alarm risk switch quantity “250VAC/3A or 30VDC/3A”;

· Use environment : work temperature of meter -20℃～70℃,relative humidity 90%RH, without condensation on surface; 

· High-temperature acceleration sensor （BE-90G）, work temperature -55℃~125℃; 

· Installation mode: dashboard-mounted or mounted on local protective box;

· Outline dimension of meter: W×H×L（160×80×160）mm;

· Opening dimension of meter: W×H×L（152×76×160）mm;